In the modern technology engineers and architects have always inspired glass. Designers want to use it to realize the transparent skin with load bearing walls. In the future it may be high performance. When you look with oblique direction into its green depths you can see it like the sea. The cutting edge of glass is the same thing like diamond knives. When we manufacture windows in French style, we cut many diamond shaped pieces. We cut the glass with the use of proper system. We have a latest technology to cut the glass properly. A strips of pre marked laminated glass panes by a machine.
Then the table carries out strips. Cushion is marked and mark is calibrated in relation to the size of the scrap the operator has manually verified beforehand and set on the control panel. Step by step movements are controlled by the operator with a special pushbutton and the working cycle is realized. The glass is clasped by a pincer and is performed cutting of the upper and lower glass and stretches the PVB membrane. To ensure minimum heating of the membrane and the glass, the operator applies stretching in an even and adjustable way. After this step the operator carefully cuts the PVB membrane with the use of a cutter.
|
|
|
|
|
|